R.K. Joki, A.E. Jensen, J. Lilleborge, T. Thorvaldsen, “A Modelling Approach for Predicting the Capacity of a Wet Lay-up Composite Scarf Repair of Fiber Reinforced Polymer Laminates”, AVT-266 Research Specialists’ Meeting, 41st APPLIED VEHICLE TECHNOLOGY PANEL BUSINESS MEETING WEEK, NATO – 16-18 April 2018.

R.K. Joki, T. Thorvaldsen, “Analysis to support the in-service monitoring of the repaired structure”, European Defence Agency, EDA CAT B project No B1324 GEM1 GP, 2017.

L. Ascione, J. F. Caron, P. Godonou, K. van Ijselmuijden, J. Knippers, T. Mottram, M. Oppe, M. G. Sørensen, J. Taby, L. Tromp “Prospect for new Guidance in the Design of FRP”, JRC Science and Policy Report, 2016

T. P. Jones, T. Thorvaldsen, R.K. Joki, B.R. Karlsen, A.E. Jensen, G. Sagvolden, “FEM simulations and analytical calculations to support design and analysis”, European Defence Agency, EDA CAT B project No B1324 GEM1 GP, 2016.

Jensen A. E., Lilleborge J., Thorvaldsen T., Thorkildsen H. E., Farsund Ø., and Pran K., ”Creep measurements of steel bolted and pretensioned GFRP composite joint using fibre optic strain sensors”. EMCC15, Venice, Italy, June, 2012.

Jensen A. E., et al., ”Global load estimations for a 75 meter FRP composite SES vessel using a scaled model instrumented with a network of fiber optic sensors ”, FAST 2011, Honolulu, USA, Sept. 2011.

Jensen A. E., Taby J., Torkildsen H. E., Brodtkorp P. A., Weidemann Løvseth S., Sagvolden G., and Pran K., ”Safe operation of ships using real-time monitoring and statistical predictions” pp. 20.1-12, NATO conference RTO-ATV-164, Bonn, Germany, Oct. 2009.

Jensen A. E., et al., ”Safe operation of ships using real-time monitoring and statistical predictions”, FAST 2009, vol. 3, pp. 295-306, Athens, Greece, Oct. 2009.

Høyning B., McGeorge D. “Survivability of naval composite structures” – EUROPEAN SURVIVABILITY WORKSHOP 2008, Malvern, UK

Torkildsen H. E., Brodtkorp P. A., Wang G., Jensen A. E., and Skaugen A., ”Investigation of wave loads on a surface effect ship with an extended fiber optic ship hull health monitoring system”, 5th I. W. on Structural Health Monitoring, San Francisco, USA, Sept. 2005.

Vollen M. W., Vikhagen E., Wang G., Jensen A. E., and Haugland S. J., ”Application of shearography techniques for vibration characterization and damage detection in sandwich structures”, pp. 21.1-12, NATO conference RTO-MP-AVT-124, Budapest, Hungary, 2005.

Torkildsen H. E., Grøvlen Å., Skaugen A., Wang G., Jensen A. E., Pran K., and Sagvolden G., “Development and applications of full-scale ship hull health monitoring systems for the Royal Norwegian Navy”, pp. 22.1-12, NATO conference RTO-MP-AVT-124, Budapest, Hungary, 2005.

Jensen A. E. and Wang G., “Finite element analysis of ship hulls for structural health monitoring applications using fiber optic sensors”, pp. 41-48, Proc. of the 2nd E. W. on Structural Health Monitoring, Munich, July 2004.

Vikhagen E., Haugland S. J., Vollen M. W., Vines L., Wang G., and Jensen A. E., “Vibration characterization for damage detection in sandwich structures using shearography techniques”, pp. 917-924, Proc. of the 2nd E. W. on Structural Health Monitoring, Munich, July 2004.

Høyning B., “The Fire Onboard the Composite MCMV Vessel “Orkla” – The Fire and Lessons Learned” Composites in Fire Conference, Newcastle, UK, Sept 2003

Jensen A. E., Taby J., Pran K., Sagvolden G., “Full-scale measurements of global loads on SES vessels built in FRP sandwich materials using networks of fibre optic strain sensors”, HIPER 02, pp 234-247, Bergen, Norway, 2002.

McGeorge D., Høyning B. ”Fire safety of naval vessels made of composite materials: Fire safety philosophies, ongoing research and state of the art passive fire protection” NATO AVT/RTO specialist meeting, Aalborg, Denmark, 2002

Jensen A. E., Taby J., and Høyning B.. “Structural design and results from full-scale structural measurement on the RNoN high speed SES “KNM Skjold” “, FAST 2001vol. 3, pp. 143-151, Southampton, UK, Sept. 2001.

Jensen A. E., Taby J., Pran K., Sagvolden G., and Wang G.: “Measurement of global loads on a full scale SES vessel using networks of fiber optic sensors”, J. of Ship Research, vol. 45, 3, pp. 205-215, 2001.

G. Wang, K. Pran, G. Sagvolden, G. B. Havsgard, A. E. Jensen, G. A. Johnson and S. T. Vohra, “Ship hull structure monitoring using fibre optic sensors. Smart Materials & Structures 10, 472-478, 2001.

Høyning B., “Meeting commercial and military requirements to passive fire protection of composite high speed crafts” Composites in Fire Conference, Newcastle, UK, Sept 2001

Taby J., Hjelmseth A., Høyning B., ”GRP in Naval applications. Possibilities and Production Aspects” NATO AVT/RTO specialist meeting, Loen, Norway, 2001

Høyning B., Taby J., ”Warship design: The potential for composites in frigate superstructures”, Lightweight Construction, Latest Developments, RINA conference, London, UK, 2000

Pran K., Johnston G., Jensen A. E., Heggstad K. A., Sagvolden G., Farsund Ø., Chang C. C., Malsawma L., and Wang G.: “Instrumentation of a high-speed surface effect ship for structural response characterization during seatrials”, Smart Structures and Materials 2000, Sensor Phenomena and Measurement Instrumentation for Smart Structures and Materials, SPIE vol. 3986, Newport Beach, […]

Johnson G. A., Pran K., Sagvolden G., Farsund Ø., Havsgård G. B.,Wang G., Jensen A. E., and Taby T.: “Surface effect ship vibro-impact monitoring with distributed arrays of fiber Bragg gratings”, Proc. of Int. Modal Aanalysis Conf. No. 18, pp. 1406-1411, San Antonio, USA, 2000.

A. E. Jensen, J. Taby, K. Pran, G. Sagvolden and G. Wang: Global Load Measurements on a Surface Effect Ship using a Network of Fiber Optic Strain Sensors and Detailed Fe Analyses. ICCE/7, Denver July 2-8, 2000.

G. A. Johnson, K. Pran, G. Sagvolden, Ø. Farsund, G. B. Havsgård, G. Wang, A. E. Jensen and J. Taby: Surface Effect Ship Vibro-Impact Monitoring with Distributed Arrays of Fiber Bragg Gratings.  IMAC 18,1999.

Jensen, A. E, Taby, J, Pran K, Sagvolden, G and Wang, G.  Measurement of global loads on a full scale SES vessel based on strain measurements using networks of fibre optic Bragg sensors and extensive finite element analyses. 1999.

Høyning, B. and Taby, J.: “Fire Performance of Composite Marine Structures in Relation To The IMO High Speed Craft Code” Composites in Fire Conference, Newcastle UK, 1999

Høyning, B. and Taby, J.: “Passive Fire Protection of Structural Composites”, 4.th International Conference on Sandwich Structures, Stockholm, Sweden, 1998

Jensen A E, Berg J E, Taby J: “Design and modelling of sandwich plate for drop test”, FFI/NOTAT, Forsvarets Forskningsinstitutt, 1998.

Høyning, B. and Taby, J.: “Fire Safety for Composite vessels: Fire Protection and Structural Integrity – An Integrated Approach” Fast ’97 Conference, Sydney, 1997

Papers relevant to fire safety, fire properties of composite materials, fire risk analysis, where main or co-authors belongs to the FiReCo staff. Fire_Characteristics_of_Cored_Composite Meeting Commercial and Military Requirements to Passive Fire Protection of Composite High Speed Crafts

Taby, J. and Høyning, B.: “Application of Multiaxial Reinforcements in the Marine Industry”. Int. Conference : Nautical Construction with Composite Materials, IFREMER; Paris 7-9 dec. 1992.

Taby, J., Johnsen, R. and Høyning, B.: “Composite Materials and Structural Analysis of High Speed and Light Marine Crafts. A Guide to Materials Selection and Methods of Analysis”. Royal Norwegian Council for Scientific and Industrial Research, MV 01.28551, 1992

Yao, T., Taby, J. and Moan, T.: “Ultimate Strength and Post-Ultimate Strength Behavior of Damaged Tubular Members in Offshore Structures”. Journal of Offshore Mechanics and Arctic Engineering, Vol. 110, August 1988.

Taby, J.: “DENTA II-PC, Users Manual”. PC Version 1.00,  Division of Marine Struc­tures, Norwegian Institute of Technology, Trondhe­im, Rep. SK/R 98/87, November 1987.

Moan, T. and Taby, J.: “Strength assessment of damaged tubular offshore structures”.  Brasil Offshore, Rio de Janeiro, Brasil 1987.

Amdahl, J., Taby, J. and Granli, T.: “Progressive collapse analysis of mobile plattforms”.  PRADS ’87, Third Int. Symp. on Practical Design of Ship and Mobile Units, Trondheim, Norway  June 1987.

Taby, J. and Moan, T.: “Ultimate behaviour of circular Tubular Members with large initial imperfections”. SSRC conference in Houston 23-25 March 1987.

Taby, J.: “DENTA, Users Manual (NORD version)”. Division of Marine Struc­tures, Norwegian Institute of Technology, Trondheim, Rep. SK/R 94 1986.

Taby, J.: “DENTA, Users Manual”. Division of Marine Struc­tures, Norwegian Institute of Technology, Trondheim, Rep. SK/R 93 1986.

Taby, J.: “Ultimate and Post-Ultimate Strength of Dented Tubular Members”. Dr.ing thesis.  Division of Marine Struc­tures, Norweg­ian Institute of Technology, Trondheim 1986.

Taby, J.: “Experiments with Damaged Tubulars”. SINTEF report No. STF71 A86067, Trondheim 1986.

Yao, T., Taby, J. and Moan, T.: “Ultimate Strength and Post-Ultimate Strength Behaviour of Damaged Tubular Members in Offshore Structures”. Proc. 5th OMAE Conf., Tokyo, 1986.

Taby, J.: “Residual Strength of Damaged Tubulars. Final report” SINTEF report No. STF71 A86068, Trondheim 1986.

Taby, J. and Moan, T.: “Collapse and Residual Strength of Damaged Tubular Members”. Proc. BOSS’85, Delft, 1985.

Taby, J.: “Residual Strength of Damaged Tubular Members”. SINTEF report No. STF71 84039, Trondheim 1984.

Taby, J.: “Experimental Investigation of the Residual Strength of Damaged Tubular Members”. SINTEF report No. STF88 A84007, Trondheim 1984 (Limited).

Aanholdt, J.E. van and Taby, J.: “Analysis of Structure with Damaged Structural Members”. SINTEF report  No. STF88 A83002, Trondheim 1983.

Søreide, T.H., Moan, T., Amdahl, J. and Taby, J.: “Analysis of Ship/Platform Impacts”. Third Int. Conference on Behaviour of Offshore Structures, Aug. 2. – 5., Mass. Inst. of Technology, Boston, 1982.

Rashed, S.M.H., Taby, J. and Moan, T.: “Theoretical and experi­mental study of the behavior of damaged tubular members”. First Indian Conference in Ocean Engineering, Madras, Febr. 18. – 20. 1981.

Taby, J., Moan, T. and Rashed, S.M.H.: “Theoretical and Experi­mental Study of the Behavior of Damaged Tubular Members in Offshore Structures”. Norwegian Maritime Research, Vol. 9, No. 2, 1981.

Taby, J. and Rashed, S.M.H.: “Experimental investigation of the behavior of damaged tubular members”. Division of Marine Struc­tures, Norwegian Institute of Technology, Trondheim, Rep. SK/R 92, 1980 (Limited).